Remote Glow Question

[mdarr00 at comcast.net]

Let's keep in mind that the angled plug on the Mintor 140 does not really matter.  You only need to hook the remote glow up to one of the two plugs.  So if the angled plug is going to create a problem, then just hook up your remote glow to the straight plug.

Mike Darr
  ----- Original Message ----- 
  From: Lance Van Nostrand 
  To: discussion at nsrca.org 
  Sent: Saturday, April 17, 2004 10:02 AM
  Subject: Re: Remote Glow Question


  It's 1:15am for you.  This is not the kind of thing to be worrying about at that hour. All the remote glow ideas that were on this list earlier should work.  I have a Wagner remote glow gadget on one and a spring loaded clip from the hobby store on another.  The plugs are not angled, like the 140 so I think there should be no special problems.
  --Lance

    ----- Original Message ----- 
    From: David Lockhart 
    To: discussion at nsrca.org 
    Sent: Saturday, April 17, 2004 12:17 AM
    Subject: Remote Glow Question


    Anyone using a remote glow setup on a 3M Mintor head?

    Thanks,

    Dave Lockhart
    DaveL322 at comcast.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040417/6fbb1737/attachment.html