1.40 FZ assembly question

[jivey61 at bellsouth.net]

 Legend,
 It cost $8.75 from Central Hobby.  CHANGE IT.

 Jim Ivey
> 
> From: Legend5rc at aol.com
> Date: 2004/04/15 Thu AM 12:23:14 EDT
> To: discussion at nsrca.org
> Subject: 1.40 FZ assembly question
> 
> If the front bearing's rubber oil seal sustained slight damage upon the front 
> bearing's removal, does it need to be replaced?  I knocked out the front 
> bearing to make sure it was in good condition.  It was and I am planning on 
> reusing it.  The oil seal did have a small piece of its inner flange knocked off by 
> the wooden dowel I was using.  Thoughts anyone?
> 
> 

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.