6V packs servo safe or not

[Anthony Abdullah]

So, is it safe to use an unregulated 6v pack with any quality receiver and servos? I have always used the Duralite regulator, but would like to get rid of it so I can quick charge directly through the switch without taking the canopy off and disconnecting the battery. 
 
I was told that I could do that anyway depending on how it was wired, but I set it up exactly as the instruction say and am not able to quick charge through the jack.
 
Thanks
Anthony
 
Anthony Romano <anthonyr105 at hotmail.com> wrote:

Have used lots of Airtronics 735/732's on 6v with no problems. Also, had 
some 751's on six volts. Usually if the mfg specs the servo on 6v then it is 
no problem using 6v. I believe Futaba was the only one who used to advise 
against 6v use.

Anthony

>From: jacoviro at post.tau.ac.il
>Reply-To: discussion at nsrca.org
>To: discussion at nsrca.org
>Subject: 6V packs on digitals...
>Date: Wed, 14 Apr 2004 12:00:56 +0300
>
>
>Hello all,
>
>I have heard a few days ego about 6V packs not suitable for using with 
>digitals.
>I have Airtronics ERG-VB, and am using 6V packs for a while. Should I 
>expect a
>problem with it? Should it shorten servo's expected life-time? Any other
>problems I may not be aware of using this arrangement?
>
>Airtronics do specify the servo's specifications using 6V... so I'm a bit
>confused.
>
>Thanks in advanced
>Ronen
>
>
>----------------------------------------------------------------
>This message was sent using IMP, the Internet Messaging Program.
>
>====================================# To be removed from this list, go to 
>http://www.nsrca.org/discussionA.htm
>and follow the instructions.
>

_________________________________________________________________
Persistent heartburn? Check out Digestive Health & Wellness for information 
and advice. http://gerd.msn.com/default.asp

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040414/c911a04d/attachment.html