Engine Starter

[Tony Stillman]

Use the B&P 10 cell system for the Kavan.... It works great, especiall for
$68!

Tony Stillman
Radio South
3702 N. Pace Blvd.
Pensacola, FL 32505
1-800-962-7802
www.radiosouthrc.com
----- Original Message ----- 
From: "Randy" <randy10926 at comcast.net>
To: <discussion at nsrca.org>
Sent: Tuesday, April 06, 2004 5:43 PM
Subject: Re: Engine Starter


> I have the same probelm with my Webra 145.  12 cells on the kavan will do
it
> when it is just off the charger.  But only for 2 starts, then it is back
to
> hand flipping.
>
> What can of box do you have your 14 cells in?
>
> Randy
>
> ----- Original Message ----- 
> From: "Peter Pennisi" <pentagon.systems at bigpond.com>
> To: <discussion at nsrca.org>
> Sent: Tuesday, April 06, 2004 6:37 PM
> Subject: RE: Engine Starter
>
>
> > Lee,
> >
> > A cheap solution may be to add a couple more cells to your Kavan
starter.
> I
> > have 14 cells on mine which flips the YS140 DZ easily.
> >
> >
> > Peter
> >
> > -----Original Message-----
> > From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
> On
> > Behalf Of Lee Davis
> > Sent: Wednesday, 7 April 2004 8:27 AM
> > To: discussion at nsrca.org
> > Subject: Engine Starter
> >
> > I've got a Hobbico Torquemaster 180 and a Kavan with the 12 nicads.
> Neither
> > cranks my Webra 1.60 worth a flip (note pun).  Any suggestions?
> Preferably
> > an off the shelf solution.
> >
> > Lee Davis
> >
> > =====================================
> > # To be removed from this list, go to
http://www.nsrca.org/discussionA.htm
> > and follow the instructions.
> >
> >
> >
> > =====================================
> > # To be removed from this list, go to
http://www.nsrca.org/discussionA.htm
> > and follow the instructions.
> >
> >
>
>
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
>
>


=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.