Engine Starter

[Dwayne & Nancy Brown]

My OS160 starts when I flip the spinner backwards with my fingers.  Dwayne

----- Original Message ----- 
From: "Alan Hewson" <alan at countryworkshop.ca>
To: <discussion at nsrca.org>
Sent: Tuesday, April 06, 2004 7:33 PM
Subject: Re: Engine Starter


> I tried a Sullivan Dynatron starter on my OS160 last summer with limited
> success.
> I was told this starter would have NO problem on an engine that size.It
will
> not turn it over at all when I plug it into my power panel powered by one
of
> those "hobby" sized flight box sealed lead acid batteries.
> The only way it works consistently is when I power it DIRECTLY from a 600
> Cold Cranking Amp car battery........Problem.....The flight box gets very
> heavy with a car battery inside it.
> My first contest with that engine, which was only the fourth flight on
that
> engine and plane, I had to borrow starters from other pilots. Five out of
> six of the Kavan starter setups would NOT start my engine.
> I'm still looking for the answer......I don't like flipping engines by
> hand......I like my fingers the way they are.
> Alan Hewson
>
>
>
> ----- Original Message ----- 
> From: "Lee Davis" <lee at piedmontmodels.com>
> To: <discussion at nsrca.org>
> Sent: Tuesday, April 06, 2004 6:26 PM
> Subject: Engine Starter
>
>
> > I've got a Hobbico Torquemaster 180 and a Kavan with the 12 nicads.
> Neither
> > cranks my Webra 1.60 worth a flip (note pun).  Any suggestions?
> Preferably
> > an off the shelf solution.
> >
> > Lee Davis
> >
> > =====================================
> > # To be removed from this list, go to
http://www.nsrca.org/discussionA.htm
> > and follow the instructions.
> >
> >
>
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.