What is the favorite pipe/muffler for YS DZ 140?

[Troy Newman]

Central Hi Performance Header, Hatori 693

Slide the 5/8" Teflon over the end of the Hatori 15mm pipe inlet and use a
piece of silicone coupler like on the 2 stroke pipe setups to bridge the
gap. This way the Teflon is over the pipe inlet and no Exhaust gases are
hitting the silicone coupler. This lasts a long long time...over a year
before replacing the Silicone coupler and it doesn't leak past the silicone
coupler. Use a Spring clamp Hatori style on both ends of the silicone
coupler. Front one will clamp the silicone and 5/8" Teflon onto the Hatori
Pipe and the rear one is used to attached the silicone to the Hatori pipe.
Works very well.

Available from Central Hobby at www.centralhobbies.com/Exhaust/Exhaust.html
Silicone Part # NMPHTS


Pipe is...#698  FAI Pipe for 120~140-4C 35 mm 460 mm on
www.centralhobbies.com/Exhaust/mufflers.html

Works good. Not as light as you can go but no problems with it.

It makes noise and doesn't melt under high temps.

Troy






----- Original Message ----- 
From: <michael.holland at power.alstom.com>
To: <discussion at nsrca.org>
Sent: Monday, September 29, 2003 5:31 PM
Subject: Poll: What is the favorite pipe/muffler for YS DZ 140?


> A poll for the list members who use the YS DZ 140 engine:  What
> pipe/muffler brand, size... are you using on this engine?   Please include
> the header brand also.
> If you don't mind include hits! and misses if any.
> Thanks in advance for the info.
>
> MH
>
> CONFIDENTIALITY : This e-mail and any attachments are confidential and may
> be privileged. If you are not a named recipient, please notify the sender
> immediately and do not disclose the contents to another person, use it for
> any purpose or store or copy the information in any medium.
>
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
>
>
=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#