Zimpro "Commercial"

[randy10926 at comcast.net]

The Viper IIMs I had where built just a straight.  Denins does super work.

Randy
> I've had the Viper FG for a few days, and started working on things.  I
> just *had* to brag a bit for Dennis Hunt at Zimpro Marketing (link on my
> website).he builds these beautiful ARC's (like my Viper 202 of a few
> years' back).
>             This one, slightly smaller, but with plenty of wing, is
> amazingly light.
>  
> The "commercial" is about his jig-building and setup.  As received from
> him, the cutout for the stab fit absolutely PERFECTLY, in both
> incidence, and alignment, and the stab fit the cutout equally well.  NO
> change, not even light sanding, was required!!!  Then the wings had
> exactly the incidence they needed, and are also perfectly square. (I use
> a mm tape measure to check everything, and couldn't see any slop at all,
> anyplace!)
>  
> If anyone wants an all-balsa, VERY nicely-ARC finished pattern bird,
> give Dennis a call.  I can hardly wait to fly an airplane this true.
>  
> (The preceding was an uncompensated endorsement)
>  
>  
> Bob Pastorello
> El Reno, OK
> AMA 46373, NSRCA199
>  
> 

> =====================================
> # To be removed from this list, send a message to 
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
> 

=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#