Temptation quuestion
Earl Vincent
ev3464 at sccoast.net
Tue Sep 2 01:23:34 AKDT 2003
MessageGood luck with it, if you liked the Focus you are going to love the Temp, the numbers Bob have given are very
close plus or minus a couple of degrees of what I have been flying on two different Temptations so they would
be a good starting point, both of mine needed about 6% up elev mix on both left and right rudder balanced on the leading edge of the wing tube and if you are going to use anything larger than a 16 inch prop, set it up with
extra right thrust while you are building it. Cheers.
Earl
----- Original Message -----
From: Gordon Anderson
To: discussion at nsrca.org
Sent: Monday, September 01, 2003 9:20 PM
Subject: RE: Temptation quuestion
Earl,
Thanks for the offer. I'm using a 9 zap. I have thought about trying a JR but I'll most likely put my money into the airplane and not change radios next season.
I have been flying a Focus all season in Advanced and I'm sure looking forward to the Temptation. I got the deluxe kit and I have been very impressed with the kit. I should have it ready for paint in a month or so. The D8 season ended this weekend, so I'm going to get busy building and practicing for next season.
--Gordon
-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org] On Behalf Of Earl Vincent
Sent: Monday, September 01, 2003 4:45 PM
To: discussion at nsrca.org
Subject: Re: Temptation quuestion
Hi Gordon if you are using a JR 10x, I can e-mail you a set of settings to start with if you are set up with Data safe. let me know if you need any more info.
Earl
----- Original Message -----
From: Gordon Anderson
To: discussion at nsrca.org
Sent: Monday, September 01, 2003 4:55 PM
Subject: Temptation quuestion
Can someone please give me control surface throw recomendations for the Temptation. I can't seem to find anything in the instructions about a good starting point.
Thanks!
--Gordon
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030902/d2d3e854/attachment.html
More information about the NSRCA-discussion
mailing list