Bully 145 head

[David Harmon]

Clarence Lee still does it and it works well. I have several engines
with the Helicoil in the head as well as the back plate and exhaust.
 
Regards

Dave Harmon
NSRCA 586
K6XYZ at comcast.net
Torrance, Ca. 
-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
On Behalf Of Troy Newman
Sent: Monday, September 01, 2003 2:23 PM
To: discussion at nsrca.org
Subject: Re: Bully 145 head
 
Webra 145 Head...only a single plug head but it will fit. The Bully
motor was based on the Webra and they did some mods to the motor....This
was back before some of the Mixture control Carbs and other goodies that
make the large 2 strokes viable for pattern flying. 
 
I would say try the Webra Head....
 
Also I don't have experience with it...but some people have installed a
"helicoils" (Sp?)
 
Clarence Lee does this for some modelers, and I know of other modelers
that have done it....I personally have not...so I would not even know
how to.
 
 
Troy
 
----- Original Message ----- 
From: Mark Garcia <mailto:markg at tstt.net.tt>  
To: discussion at nsrca.org 
Sent: Monday, September 01, 2003 5:00 PM
Subject: Bully 145 head
 
One of the glow plug holes on my bully 145 has damaged threads and the
can't be tightened. Replacement head is not available. Can any one
recommend a fix?
Thanks
 
Mark
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030901/39aa7ead/attachment.html