Well, now you guys did it....

[Woodward James R Civ 412 TW/DRP]

Hi Jon,

I've been running the 3M 140 with a 17 x 10 prop.  It hovers my Phase One at
1/3 throttle.  If your close to ½ throttle, it will definitely climb out.
15% Cool Power.

Jim W.

 

 

-----Original Message-----
From: Jon Uhler [mailto:juhler at bellsouth.net] 
Sent: Saturday, October 11, 2003 9:59 AM
To: discussion at nsrca.org
Subject: Re: Well, now you guys did it....

 

Earl,

 

Should be a fun set up.  The 1.40 is a real strong motor and should have
this bird around just fine.

 

Jon

----- Original Message ----- 

From: EHaury at aol.com <mailto:EHaury at aol.com>  

To: discussion at nsrca.org <mailto:discussion at nsrca.org>  

Sent: Saturday, October 11, 2003 9:59 AM

Subject: Re: Well, now you guys did it....

 

Jon

 

You'll like the Lite Stik with the 3M, I've a YS 140DZ on one and it flies
quite well (10,5#). A good equipment test airplane that uses pattern stuff
(radio, servos, engine, fuel system, etc.) I use the "flaps" as mixed
ailerons for testing new / rebuild servos. Interesting that a "lite"
airplane has wing panels in the 900 grams each range, when pattern folks
consider 400g to be on the heavy side.

 

Earl

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20031014/dd4143fd/attachment.html