NIMH TX pack

Derek Koopowitz derekkoopowitz at earthlink.net
Thu Oct 9 17:19:32 AKDT 2003


So you use the N function to charge it?  For how long?  It doesn't auto
cut-off to trickle... How about the I or C function?

-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org] On
Behalf Of Tony Quist
Sent: Thursday, October 09, 2003 4:19 PM
To: discussion at nsrca.org
Subject: RE: NIMH TX pack


I use the Alpha to charge all my Nimh.  But I use c/10.  Most High capacity
small size batteries were not meant to be fast charged.  If you used the
alpha and the pack was the only one charging, it would be a 1 amp charge.
That is a pretty hot charge for that type of battery.

-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
On Behalf Of Verne Koester
Sent: Thursday, October 09, 2003 2:38 PM
To: discussion at nsrca.org
Subject: Re: NIMH TX pack

Derek,
I went to the Litco site and read all of their instructions on using the
Alpha on NIMH packs and followed those instructions to the letter on my
2000mah NIMH Tx pack. The pack got much hotter than I felt it should and I
shut it down before it was finished. After checking with more experienced
guys who had been using NIMH including feeling the temp of their packs at
peak charge, I came to the conclusion that  the Alpha isn't suited to NIMH
batteries. I bought a GP Titan charger and it works great. This isn't meant
to slight the Alpha in any way since I've been using it on Nicads with great
success for years. However, my experience indicates it isn't he best choice
for NIMH.

Verne


----- Original Message -----
From: "Derek Koopowitz" <derekkoopowitz at earthlink.net>
To: <discussion at nsrca.org>
Sent: Thursday, October 09, 2003 4:54 PM
Subject: NIMH TX pack


> I just ordered a new (replacement) TX NimH battery pack from Cermark.
It
is a 1650mah pack.  I've never had a NimH pack before so I'd like to find
out from the experts out there if there is anything I need to do differently
than a standard NiCad pack.  Can I use my Alpha 4 to charge it?  I do have a
Dymond charger that I can use and I know that it does support NimH but I'd
prefer to use the Alpha 4 because of its AC/DC versatility.
>
>
> Thanks.
>
>
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
>

=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#


=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#



==================# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#



More information about the NSRCA-discussion mailing list