CTE

[David Harmon]

I like the idea of having 2 servos in the usual area with 2 wires on
each servo.
The only downside I see is having to check for equal throw occasionally.
Building them in the stab is a pain...I don't like the long servo cables
either.
 
Regards

Dave Harmon
NSRCA 586
K6XYZ at comcast.net
Torrance, Ca. 
-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
On Behalf Of Alan Simmonds
Sent: Tuesday, November 25, 2003 4:50 PM
To: discussion at nsrca.org
Subject: RE: CTE
 
<My current thinking is that I will still mount the servo in the same
area and go with cables.Very light and direct.>  
 
Georgie
I am also deliberating whether to use stab mounted elevator servos on my
next model but I'm curious about how the geometry would work on a closed
loop setup and still use a good proportion of the servo rotation.  Any
thoughts?
Alan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20031125/0da7a418/attachment.html