sheeted foam core wing facing

[davel322 at comcast.net]

Any glue will be stronger than the foam - aliphatics (titebond), foam CA, epoxy, poly-u, will all work.  The easiest to sand is Pica Gluit - so I prefer it as it makes it much easier to sand the TE flush when done (and it is cured for handling in 1-2 hours, sandable in 6 or so).

Dave Lockhart
DaveL322 at comcast.net
> I'm ready to install the aileron/wing facing for hinging on my Widebody 60.
> I used Titebond for the leading edge and tips.
> Is Tightbond strong enough for the hinge facing, or should I use epoxy?
> thanx...croz
> 
> =====================================
> # To be removed from this list, send a message to 
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
> 
=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#