ZN Majestic Wing Section

Koenig, Tom Tom.Koenig at actewagl.com.au
Mon Nov 10 19:41:03 AKST 2003


Paul,

I cant really help you...but....I was always under the impression that the
Majestic just had the same wing etc. I believe the ailerons etc were sized
up for the  AA stuff,  the fin is cut down to allow for the huge
conterbalance.

I have a little Kyosho Majestic...but that will be no use to you.

Maybe you could try ZN directly...but I doubt they will be much help other
than suggest you purchase a set of wings etc, but I may be wrong there, so
try your luck.

If all else fails,  I'd add a bit of span to the section you have, maybe
even a thicker % tip. Make the ailerons huge and run them further inboard.
Stab I'd increase in area too, mainly span and huge elevators.

Try and find some pics and just take a guess if nothing else turns up.

Goodluck

Tom

> ----------
> From: 	Paul Hepworth[SMTP:paulhepworth at hotmail.com]
> Reply To: 	discussion at nsrca.org
> Sent: 	Saturday, 8 November 2003 4:55
> To: 	discussion at nsrca.org
> Subject: 	ZN Majestic Wing Section
> 
> Can any one tell me what the wing section for the ZN Majestic is and if
> any one has any detailed measurements of the wing, tail plane, rudder and
> the moment arm e.g. 
> I have a Caprise kit that I have no use for pattern so I want to convert
> to a Majestic for Artistic Aerobatics. 
> I have already built a wing and tail for the Caprise so I need a new set
> cut. 
> I need to know the section so I can go into my data base on the CNC system
> for the best results. I am not sure if the tail is the some between the
> caprise and the majestic, looking at some pics the majestc is a different
> shap and size. 
> 
> 
> All the best 
> 
> 
> 
> 
>   _____  
> 
> Help STOP SPAM with the new MSN 8 and get 2 months FREE*
> 

************************************************************************
*PLEASE NOTE*  This email and any attachments may
be confidential. If received in error, please delete all 
copies and advise the sender. The reproduction or 
dissemination of this email or its attachments is 
prohibited without the consent of the sender.

WARNING RE VIRUSES:  Our computer systems sweep
outgoing email to guard against viruses, but no warranty 
is given that this email or its attachments are virus free. 
Before opening or using attachments, please check for 
viruses.  Our liability is limited to the re-supply of any 
affected attachments.

Any views expressed in this message are those of the 
individual sender, except where the sender expressly,
and with authority, states them to be the views of the 
organisation.
************************************************************************
=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#



More information about the NSRCA-discussion mailing list