Mintor 1.7 - low cost engines

[White, Chris]

Hi Luis and Roberto,

I'm using a Mac's header (I forget the rise), the Greve pipe, APC 16X14
(ground clearance concerns....) and I'm taching 7700-7800 on Cool Power 15%

Hope this helps you....I don't know where to get the engine for $259.00, but
I think Mike has sent you a response on that....
Chris

-----Original Message-----
From: discussion-request at nsrca.org
[mailto:discussion-request at nsrca.org]On Behalf Of Roberto Estrada
Sent: Wednesday, November 05, 2003 5:44 PM
To: discussion at nsrca.org
Subject: Re: Mintor 1.7 - low cost engines


Hi Chris, Webra is a great option, overall about cost for low maintenance
and nitro.
Your planes are about 10lbs, mine will be about 10.5 to 11lbs, and I may see
over sea level too.
Can you tell me about your configuration, like header, pipe, prop and rev
too?

Tony post that Webra 145 are $259 now but I want to know where to buy at
this cost.

Really thank's for help.

Luis Roberto

----- Original Message -----
From: "White, Chris" <chris at ssd.fsi.com>
To: <discussion at nsrca.org>
Sent: Wednesday, November 05, 2003 7:20 AM
Subject: RE: Mintor 1.7 - low cost engines


> Hi Luis....Welcome.
> I too am a new member of NSRCA and understand your concern in cost of
> engines. I have no experience with the Mintor, but I am now running 2
Webra
> 145AAR's in 2 Zen 120 airframes which give me a cost close to the price of
1
> full blown pattern bird with a YS DZ.   I'm very happy with the
reliability
> of the Webra and the Zen flies better than anything I've flown. (over 30
yrs
> in R/C) I'm sure this ARF airframe will serve to improve my flying in the
> Intermediate class.   I have 87 runs on one Webra and the other one has 2
> new out of the box with easy tuning.  Don't get me wrong, the YS is a
great
> engine, but I find the Webra is low maintenance, low vibration and a
> powerhouse (unlimited vertical on the 10lb airframe at 750' ASL on 15%
> nitro).  I have had one problem which zeroed a round for me, but it was
> related to trash in the pump, and has not been repeated.
>
> Best of luck....
> Chris White
> Owasso, Oklahoma
>
> -----Original Message-----
> From: discussion-request at nsrca.org
> [mailto:discussion-request at nsrca.org]On Behalf Of Roberto Estrada
> Sent: Tuesday, November 04, 2003 6:37 PM
> To: discussion at nsrca.org
> Subject: Mintor 1.7
>
>
> Hi, I'm happy of be a NSRCA member (just one month a go) and is great look
> my name at K-factor (october). Hope can learn too much of you great
pilots.
> (sorry about my english)
>
> I want to know your opinion about the Mintor 1.7 with Mintor carbon pipe.
>
> I want to buy a very good engine for my first 2x2 pattern plane and really
> hope good performance.
>
> I'm looking to YS (too much money), Webra 1.45, OS 1.40 and OS 1.60 (with
> some troubles for best performance I think, but the best in price)
>
> I'm in Mexico, and my club is about 7,500 fsl.
>
> Thank's for help.
>
> Luis Diaz
>
>
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
>


=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#
=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#