How to YS push rod cover O ring ?

[jim ivey]

Paul
Remove the head bolts, take the head off intact and the o rings will be accessable. When you need to have access to the valves and rockers just remove the one allen bolt in the middle of the rocker assembly. Of course reset the lifter gaps when you reassemble.

Jim I  

----- Original Message -----
From: Paul Horan
Sent: Wednesday, May 21, 2003 2:45 PM
To: discussion at nsrca.org
Subject: How to YS push rod cover O ring ?

    I have an air leak around one of the push rod cover O rings.   
    How do I get access to the O rings ?   
    Do I remove or lossen the four cylinder head screws and remove the bolts on the pushrods ?
Thanks,
Paul
=====================================
# To be removed from this list, send a message to  
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030521/f51425df/attachment.html