140FZ RPM's?

[Jerry Budd]

Hey guys,

Don't put too much stock in what I said... I may have had a 'RVP 
Moment' when I quoted those #'s.  It's been a long time, that's why I 
said, "If memory serves me correct".

And yes, both Troy and I were out in the sun too much last weekend 
(at the Vegas contest).

Jerry

>Well from Jerry's numbers maybe I'm off base a little....Its been since 98
>that I ran an FZ.....lots of motors and lots of planes since then....Magnum
>#1 is about 23% nitro...this is what we ran also. The new 140 sport is
>nothing more than an FZ with a L carb on it....its actually been out for
>years in Japan called the FZ-II
>
>like I said maybe my brain has been in the sun too much....especially in the
>last week or two.
>
>Troy
>----- Original Message -----
>From: "Jerry Budd" <jbudd at QNET.COM>
>To: <discussion at nsrca.org>
>Sent: Wednesday, May 21, 2003 6:59 AM
>Subject: Re: 140FZ RPM's?
>
>
>>  >Can anyone let me know what RPM's I should be getting on a 140FZ
>>  >with a 16x11 APC on CoolPower 15%-20%  ?
>>  >
>>  >or any RPM figures with this prop on your fuel of choice?
>>
>  > If memory serves me correct I used to get 8800-8900 rpm on my FZ with
>>  a 16x11 on Magnum #1.
>>  --
>>  ___________
>>  Jerry Budd
>>  Budd Engineering
>>  http://www.buddengineering.com
>>  =====================================
>>  # To be removed from this list, send a message to
>>  # discussion-request at nsrca.org
>>  # and put leave discussion on the first line of the body.
>>  #
>>
>>
>=====================================
># To be removed from this list, send a message to
># discussion-request at nsrca.org
># and put leave discussion on the first line of the body.
>#


-- 
___________
Jerry Budd
mailto:jbudd at qnet.com
=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#