APC props-balance

[Rcmaster199 at aol.com]

In a message dated 5/4/2003 10:21:39 AM Eastern Daylight Time, 
jerrywil at swbell.net writes:


> Subj:APC props-balance 
> Date:5/4/2003 10:21:39 AM Eastern Daylight Time
> From:<A HREF="mailto:jerrywil at swbell.net">jerrywil at swbell.net</A>
> Reply-to:<A HREF="mailto:discussion at nsrca.org">discussion at nsrca.org</A>
> To:<A HREF="mailto:discussion at nsrca.org">discussion at nsrca.org</A>
> Sent from the Internet 
> 
> 
> 
> Instructions say not to modify the prop in any way.  But they are not
> balanced.  Do most people just use as is or balance?  If you balance, how 
> do
> you do it?
> 
> thanks,
> Jerry
> 

Jerry try painting some clear dope to the light side. Remember that the 
carrier in the dope will evaporate so over balance and let it come in. It 
will take some time to get it right.

Or do what most of us do: take 320 wetor dry paper and wet sand the heavy 
side. While you are at it, also remove the sharp trailing edge and smoothen 
the leading edge. Finish the job with 600 wet

Matt Kebabjian
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030504/1bdade69/attachment.html