Webra 145

[Jerry Budd]

It's just the regular 17x12.  They don't make a wide in that size, 
although the blade looks wide compared to the 17x12N.

Jerry

>Jerry,
>
>Is that a 17x12 wide or 17x12N that your are using?
>
>WG
>
>-----Original Message-----
>From: Jerry Budd <jbudd at QNET.COM>
>To: discussion at nsrca.org <discussion at nsrca.org>
>Date: Sunday, May 04, 2003 1:54 AM
>Subject: Re: Webra 145
>
>
>>Here's my setup:   Webra 145 Aero-X with the MC (mixture control)
>>carb on Magnum #1, OS-F or YS plug, ES-2C140L90 pipe set at 23-1/4"
>>baffle to plug (straight line distance), stock Mac's 2-1/4" rise
>>header, and an APC 17x12 prop.  This combo turns 8600 peak rpm, I fly
>>it at ~8400 rpm.  The same setup on my two OS140Rx's turn 8400 rpm
>>peak, fly at ~8200 rpm (for some reason I seem to have above average
>>motors).
>>
>>Jerry
>>
>>>145 on Greaves pipe.  8500 on APC 17-10, 15% Pylon Ritchs Brew.  Is
>>>that good compared to the number you guys are running?
>>>
>>>Also, I really am running it on more of a 3D plane.  The 17-10 makes
>>>the plane jump, not very smooth.  I would like it to trasition a
>>>little more linear.  What suggestions do yall have for a prop?
>>>
>>>Thanks,
>>>
>>>Tony D
>>>
>>>
>>>----- Original Message -----
>>>From: <mailto:Eric.Henderson at gartner.com>Henderson,Eric
>>>To: <mailto:discussion at nsrca.org>discussion at nsrca.org
>>>Sent: Saturday, May 03, 2003 8:40 PM
>>>Subject: RE: Webra 145
>>>
>>>The wrist pin is threaded on the inside. A head bolt will pull it out.
>>>
>>>Eric.
>>>
>>>
>>>-----Original Message-----
>>>From:
>>><mailto:discussion-request at nsrca.org>discussion-request at nsrca.org
>>>[mailto:discussion-request at nsrca.org]On Behalf Of Don Ramsey
>>>Sent: Saturday, May 03, 2003 2:24 PM
>>>To: <mailto:discussion at nsrca.org>discussion at nsrca.org
>>>Subject: Webra 145
>>>
>>>I'm trying to disassemble my Webra 145 and can't seem to find the
>>>secret to removing the wrist pin and connecting rod.  Sleve is out
>>>but there must be a secret.  Anyone know?
>>>
>>>DR
>>
>>
>>--
>>___________
>>Jerry Budd
>>mailto:jbudd at qnet.com
>>=====================================
>># To be removed from this list, send a message to
>># discussion-request at nsrca.org
>># and put leave discussion on the first line of the body.
>>#
>>
>
>=====================================
># To be removed from this list, send a message to
># discussion-request at nsrca.org
># and put leave discussion on the first line of the body.
>#


-- 
___________
Jerry Budd
mailto:jbudd at qnet.com
=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#