MK elevator misalignment (part 2)

[Tony Stillman]

I'm using the S9550, as it is short.  Some of the smaller JR digitals would
work fine as well.

Tony Stillman
Radio South, Inc.
3702 N. Pace Blvd.
Pensacola, Fl 32505
www.radiosouthrc.com
800-962-7802
----- Original Message -----
From: "Keith Black" <tkeithb at attbi.com>
To: <discussion at nsrca.org>
Sent: Friday, March 21, 2003 12:13 PM
Subject: Re: MK elevator misalignment (part 2)


> Tony, what servo do they recommend (or do you use)? I can't find that and
> can't identify it in the picture.
>
> Thanks,
> Keith
>
> ----- Original Message -----
> From: "Tony Stillman" <tony at radiosouthrc.com>
> To: <discussion at nsrca.org>
> Sent: Friday, March 21, 2003 11:41 AM
> Subject: Re: MK elevator misalignment (part 2)
>
>
> > Click on "English".  Then, a group of buttons will appear on the left.
> > click on Kits, then Smaragd.
> >
> > Now, the main screen will have "Our Technical Instructions" at the top.
> > Click on that.
> >
> > What happens now is a set of pictures of the building of the kit are
> > available by clicking on the different sections.  The thumbnail pics
will
> > appear on the left, and you can stop them and click for a full-size
view.
> >
> > Hope this was clear enough.........
> >
> > Tony Stillman
> > Radio South, Inc.
> > 3702 N. Pace Blvd.
> > Pensacola, Fl 32505
> > www.radiosouthrc.com
> > 800-962-7802
> > ----- Original Message -----
> > From: "Tomanek, Wojtek" <tomanekw at saic-abingdon.com>
> > To: <discussion at nsrca.org>
> > Sent: Friday, March 21, 2003 10:09 AM
> > Subject: RE: MK elevator misalignment (part 2)
> >
> >
> > > Where on the PL site are the Smaragd instructions ??
> > >
> > >
> > >
> > >  -----Original Message-----
> > > From: Tony Stillman [mailto:tony at radiosouthrc.com]
> > > Sent: Friday, March 21, 2003 9:31 AM
> > > To: discussion at nsrca.org
> > > Subject: Re: MK elevator misalignment (part 2)
> > >
> > > I didn't like it on my Excellence either, and I went back to putting
> > servos
> > > in the stab halves per the instructions on the Smaragd on the PL
> website.
> > >
> > > Tony Stillman
> > > Radio South, Inc.
> > > 3702 N. Pace Blvd.
> > > Pensacola, Fl 32505
> > > www.radiosouthrc.com
> > > 800-962-7802
> > > ----- Original Message -----
> > > From: "Bill Carpenter" <bcarpenter at greenvilleisp.net>
> > > To: <discussion at nsrca.org>
> > > Sent: Thursday, March 20, 2003 5:53 PM
> > > Subject: Re: MK elevator misalignment (part 2)
> > >
> > >
> > > > Wayne,
> > > >
> > > > I haven't been following this particular discussion very closely,
but
> do
> > I
> > > > understand that you didn't like the MK bellcrank and went back to
pull
> > > pull
> > > > on the Aries elevator???????
> > > >
> > > > Bill
> > > >
> > > > ----------
> > > > >From: wgalligan <wgalligan at cnbcom.net>
> > > > >To: discussion at nsrca.org <discussion at nsrca.org>
> > > > >Subject: Re: RE: MK elevator misalignment (part 2)
> > > > >Date: Thu, Mar 20, 2003, 3:36 PM
> > > > >
> > > >
> > > > > BACK to Kevlar pull/pull for me.  Much easier to adjustment in the
> > > > > pull/pull also.
> > > > >
> > > > > Wayno
> > > > >
> > > > >> I think I may have the solution to this dilemma - Pull / Pull.
> > > > >>
> > > > >> Gene Maurice
> > > > >> gene.maurice at attbi.com
> > > > >> Plano, TX
> > > > >> AMA 3408
> > > > >> NSRCA 877
> > > > >>
> > > > >> -----Original Message-----
> > > > >> From: discussion-request at nsrca.org
> > > > >> [mailto:discussion-request at nsrca.org]On Behalf Of Keith Black
> > > > >> Sent: Thursday, March 20, 2003 3:21 PM
> > > > >> To: discussion at nsrca.org
> > > > >> Subject: Re: MK elevator misalignment (part 2)
> > > > >>
> > > > >>
> > > > >> Just checked mine that I bought two or three months ago and found
> the
> > > same
> > > > >> thing. I also noticed that the holes where the arms are inserted
> are
> > > not
> > > > >> centered. This is probably what's causing the problem.
> > > > >>
> > > > >> Keith
> > > > >>
> > > > >> ----- Original Message -----
> > > > >> From: "wgalligan" <wgalligan at cnbcom.net>
> > > > >> To: <discussion at nsrca.org>
> > > > >> Sent: Thursday, March 20, 2003 8:47 AM
> > > > >> Subject: Re: MK elevator misalignment (part 2)
> > > > >>
> > > > >>
> > > > >> > I checked mine last night and I found the same thing.
Looseness
> > and
> > > the
> > > > >> tabs where not aligned.  I was wondering why I was having a bit
of
> a
> > > problem
> > > > >> with the differential when I was setting up.  I also noticed a
> slight
> > > snap
> > > > >> in the setup and thought it was in my connectors being loose but
it
> > was
> > > the
> > > > >> looseness of the assembled bellcrank. Know I know why.  When you
> > > tighted the
> > > > >> assembly the tabs can twist due to the slop. I too did the c/a
> trick
> > > and it
> > > > >> is tight and square now.
> > > > >> > BTW this was the black MK Bellcrank and I purchased it last
June
> > '02
> > > from
> > > > >> Central Hobbies.  Definitely a Japanese product as you could
barely
> > > > >> understand the broken English.
> > > > >> >
> > > > >> > Wayne
> > > > >> >
> > > > >> >    > I had the same problem with my MK belcrank that I had
bought
> > > last
> > > > >> year. It also had a slop in the movement.The fix I applied is
> similar
> > > just
> > > > >> ca bonding a carbon strip on the flats and reshaping.
> > > > >> > > BTW, I am expecting samples of a similar but different brand
bb
> > > elev
> > > > >> belcrank (a local brand look-alike model). I will let you know
> about
> > > their
> > > > >> quality and possible availability of these ones when I receive
the
> > > samples.
> > > > >> > > Nedim
> > > > >> > >
> > > > >> > >   ----- Original Message -----
> > > > >> > >   From: NSRCA Canada-West
> > > > >> > >   To: discussion at nsrca
> > > > >> > >   Sent: Wednesday, March 19, 2003 11:53 AM
> > > > >> > >   Subject: MK elevator misalignment (part 2)
> > > > >> > >
> > > > >> > >
> > > > >> > >   Hi folk's
> > > > >> > >
> > > > >> > >   Further to my comments on the MK elevator alignment issue,
I
> > have
> > > had
> > > > >> a couple e-mails from other builder flyers that 1) have no
> alignment
> > > problem
> > > > >> and 2) do have an alignment problem. It appears as though it may
be
> a
> > > bad
> > > > >> batch so heads up.
> > > > >> > >
> > > > >> > >   I have posted a page showing the problem and a possible
> > solution.
> > > Hope
> > > > >> this helps. http://members.shaw.ca/drev/mk.htm
> > > > >> > >
> > > > >> > >   Thanks to Iiro Nikkila for bring this to my (our) attention
&
> > > offering
> > > > >> a solution.
> > > > >> > >
> > > > >> > >   Dave
> > > > >> > >
> > > > >> >
> > > > >> >
> > > > >> > =====================================
> > > > >> > # To be removed from this list, send a message to
> > > > >> > # discussion-request at nsrca.org
> > > > >> > # and put leave discussion on the first line of the body.
> > > > >> > #
> > > > >> >
> > > > >>
> > > > >> =====================================
> > > > >> # To be removed from this list, send a message to
> > > > >> # discussion-request at nsrca.org
> > > > >> # and put leave discussion on the first line of the body.
> > > > >> #
> > > > >>
> > > > >>
> > > > >>
> > > > >> =====================================
> > > > >> # To be removed from this list, send a message to
> > > > >> # discussion-request at nsrca.org
> > > > >> # and put leave discussion on the first line of the body.
> > > > >> #
> > > > >>
> > > > >
> > > > >
> > > > > =====================================
> > > > > # To be removed from this list, send a message to
> > > > > # discussion-request at nsrca.org
> > > > > # and put leave discussion on the first line of the body.
> > > > > #
> > > > >
> > > > > ---
> > > > > [This E-mail scanned for viruses by Declude Virus ]
> > > > >
> > > > >
> > > > ---
> > > > [This E-mail scanned for viruses by Declude Virus ]
> > > >
> > > > =====================================
> > > > # To be removed from this list, send a message to
> > > > # discussion-request at nsrca.org
> > > > # and put leave discussion on the first line of the body.
> > > > #
> > > >
> > > >
> > >
> > > =====================================
> > > # To be removed from this list, send a message to
> > > # discussion-request at nsrca.org
> > > # and put leave discussion on the first line of the body.
> > > #
> > > =====================================
> > > # To be removed from this list, send a message to
> > > # discussion-request at nsrca.org
> > > # and put leave discussion on the first line of the body.
> > > #
> > >
> > >
> >
> > =====================================
> > # To be removed from this list, send a message to
> > # discussion-request at nsrca.org
> > # and put leave discussion on the first line of the body.
> > #
> >
>
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
>
>
>

=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#