Center of loop

[Rcmaster199 at aol.com]

In a message dated 3/20/2003 9:09:28 PM Eastern Standard Time, 
dszczur at maranatha.net writes:


> Subj:Center of loop 
> Date:3/20/2003 9:09:28 PM Eastern Standard Time
> From:<A HREF="mailto:dszczur at maranatha.net">dszczur at maranatha.net</A>
> Reply-to:<A HREF="mailto:discussion at nsrca.org">discussion at nsrca.org</A>
> To:<A HREF="mailto:discussion at nsrca.org">discussion at nsrca.org</A>
> Sent from the Internet 
> 
> 
> 
> Center maneuver, pull 45 degrees, 7/8 outside loop to verical, two point
> roll up, exit upright.
> 
> Where is the center?  P03 Aresti sequence shows center is the loop center,
> IAC/full scale says center is the middle of the 45 degree line.  By pattern
> definition, the center of whole maneuver is  maybe the vertical up line-
> which is it?
> 
> Thanks,
> Don

Don,

There are several elements but only three parts, the 45 deg up line, the 7/8 
loop, and the vert w/ 2 pt roll to upright. I believe the IAC/full scale is 
correct= the middle of the 45 deg up line.

Matt Kebabjian
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030320/b30be778/attachment.html