Set up pea'cup truck

[wgalligan]

Gray,

Looks like a re-design of the trailer is in order... any one have a spare a/c unit?

> Wayne,
> 
> what makes you think we have room for you?
> 
> 
> 
> Gray Fowler
> Principal Chemical Engineer
> Composites Engineering
> 
> 
> 
> 
> wgalligan <wgalligan at cnbcom.net>
> Sent by: discussion-request at nsrca.org
> 03/19/2003 12:26 PM
> Please respond to discussion
> 
>  
>         To:     "discussion at nsrca.org" <discussion at nsrca.org>
>         cc: 
>         Subject:        Re: Set up pea'cup truck
> 
> 
> And as a person that can speak from experience.  I have Ranger S.cab and 
> the bed is not long enough for 2 meter airplanes.  The std length bed I 
> think is long enough.  In that case a lift up fiberglass cover would work 
> good.  A cap shell would give more hieght.  I made my trailer for 
> $450.00.. less then the cost of most caps or fiberglass covers. I made a 
> trailer thats 4x4x8 with a lift up lid.  Holds (2) 2 meter planes.  One 
> must secure everything to keep it from bouncing around.
> 
> You see... I did it this way so Lance could put his airplanes in his 
> Expidition and then he could pull my trailer when we go to the NATS.
> 
> > As a person that bought an Expedition as a plane hauler, I am in no 
> > position to advise.  But I'll do it anyway: everyone I've met that 
> didn't 
> > have a cap was not happy in the long term (hauling through rain, in 
> wind, 
> > etc.).
> > 
> > --Lance
> > 
> > 
> > 
> > 
> > 
> > glenn hatfield <randy10926 at comcast.net>
> > Sent by: discussion-request at nsrca.org
> > 03/19/2003 12:07 PM
> > Please respond to discussion
> > 
> > 
> >         To:     "discussion at nsrca.org @nsrca." <discussion at nsrca.org>
> >         cc: 
> >         Subject:        Set up pea'cup truck
> > 
> > 
> > 
> > I recently got a ford ranger with a 7 foot bed as my plane hauler. 
> > Just starting getting the bed setup for the appionted task.  Any ideas 
> > or suggetions on how to do this?
> > 
> > Randy
> > 
> > =====================================
> > # To be removed from this list, send a message to 
> > # discussion-request at nsrca.org
> > # and put leave discussion on the first line of the body.
> > #
> > 
> > 
> > 
> > 
> > 
> 
> 
> =====================================
> # To be removed from this list, send a message to 
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
> 
> 
> 
> 


=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#