Mintor Here.....

[Dwayne Brown]

Bill, that's why I only used Fox idle bar plugs.  The idle bar was machined not welded as on 
everyone else's plug.  The idle bar would not come off unless you destroyed the plug.

Dwayne

Bill Carpenter wrote:
> Wayne,
> 
> I don't know what current thinking is regarding idle bars, but way back when
> we abandoned using them because of the possibility that if one of them came
> off the glow plug it would do damage to the engine.  I've seen what has
> happened to an engine when some bearing balls got loose inside during a run.
> 
> I could be wrong, but it sounds like cheap insurance to avoid them, even if
> there is a cost in performance.
> 
> Bill
> 
> ----------
> 
>>From: "wgalligan" <wgalligan at cnbcom.net>
>>To: <discussion at nsrca.org>
>>Subject: Re: re: Mintor Here.....
>>Date: Tue, Jun 24, 2003, 12:26 PM
>>
> 
> 
>>I am breaking my Mintor 1.70 in on 2- Fox long w/idler bars.  Seems to be
>>working just fine so far.  I'll keep you posted as it breaks in some more.
>>BTW this is on the bench not in the air.
>>
>>Wayne G.



=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#