firewall installation in fiberglass fuse

Nedim Bek nedim at nbengineering.net
Sun Jun 22 19:14:57 AKDT 2003


Xavier,
Your procedure is o.k. There is nothing wrong. You may want to see Dave's website for further info.
http://members.shaw.ca/cdn_nats2003/enigma/fuse.htm

Nedim

Ultimate in F3A
www.nbengineering.net
  ----- Original Message ----- 
  From: Anne & Xavier 
  To: discussion at nsrca.org 
  Sent: Sunday, June 22, 2003 8:36 PM
  Subject: firewall installation in fiberglass fuse


  Hello all expert builders...
  I have to install a new firewall in the fiberglass fuse of my Nova and I want to do it right. I have a few questions.

  What is the more efficient/easy way to figure the exact contour to cut the firewall?

  Once the firewall is properly cut, I am intending to:
  Glue a shim behind the backplate
  Install the engine on the engine mount
  Install the nose ring
  Install the backplate and cone
  Suspend the plane nose up to locate the firewall
  Tape the cone to the fuselage
  Tack glue the engine mount on the firewall with CA
  Glue the firewall with epoxy and fiberglass on aft face
  Once dry, remove the engine and engine mount
  Add fiberglass on foward face of firewall. 

  Do I forget something ?

  Thank you

  Xavier
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030622/a50d05ee/attachment.html


More information about the NSRCA-discussion mailing list