Desperately needed: AAP Header

[Jerry Stebbins]

Anthony, If you want one, send me your address and I will send you one Monday-tomorrow. Only have a few left, and am trying to develop another source, since I can no longer get them from the old one.
Jerry
  ----- Original Message ----- 
  From: Anthony Abdullah 
  To: discussion at nsrca.org 
  Sent: Sunday, June 08, 2003 2:16 PM
  Subject: Re: Desperately needed: AAP Header


  Looks great, I am going to order one to at least check it out. That is a very good price compared to the AAP.

  John Ferrell <johnferrell at earthlink.net> wrote: 
    I will offer an unsolicited endorsement on this product.
    I have used a couple of these for a couple of seasons with Hyde mounts and no breakage!

    Tip: The locking nut is 18mm and there is very little room for a standard wrench between the head & the header nut.
    Go to your local bicycle shop and get an 18mm wrench made from stamped sheet metal. You may think you won't need it, but you will!

    John Ferrell 
    6241 Phillippi Rd
    Julian NC 27283
    Phone: (336)685-9606  
    johnferrell at earthlink.net
    Dixie Competition Products
    NSRCA 479 AMA 4190  W8CCW
    "My Competition is Not My Enemy"

      ----- Original Message ----- 
      From: Emory Schroeter 
      To: discussion at nsrca.org 
      Sent: Sunday, June 08, 2003 11:24 AM
      Subject: Re: Desperately needed: AAP Header


      Anthony,

      You might look at this website...
      http://home.att.net/~rc-enterprises/rcme_013.htm
      I don't know if the dimensions are the same, but they look similar.

      Emory Schroeter.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030608/e3a49e13/attachment.html