ST 2300 Thrust Washer

[Del Rykert]

I have used a battery terminal puller that I modify the puller teeth with a dremel to get better purchase.
 
    Del

  ----- Original Message ----- 
  From: Kenneth Blackwell 
  To: discussion at nsrca.org 
  Sent: Thursday, July 03, 2003 6:34 AM
  Subject: Re: ST 2300 Thrust Washer


  Cass,

  For years I have been using a modified puller from the auto parts store. The modification is grinding/filing down the tips of the jaws until it will fit the groove on the thrust washer. The jaws on my puller are about 4+ inches long.

  I have pulled washers off all current pattern engines including the ST2300.

  Cheers,

  Ken B.
    ----- Original Message ----- 
    From: Cass Underwood 
    To: discussion at nsrca.org 
    Sent: Thursday, July 03, 2003 6:00 AM
    Subject: ST 2300 Thrust Washer


    Guys,
    HELP!!!!!  I've got a thrust washer that will not come off the 2300...We tried a puller but could not get a good grip. Anybody got a clue?? 


    Cass Underwood
    Top Notch Trophies
    Guntersville, AL 35976
    (256)582-0606
    cass at localaccess.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030704/dc64e245/attachment.html