Help: Webra TruTurn Adapter Bushing Problem

[Ihncheol Park]

Keith,
I just looked at your picture,
Have you tried to contact Tru-Turn?
I am clearing my inventory to get one of 145, or 140RX, so I am very
interested in how this goes.
let us know what happens.

How about those who have the same engine, are they having the same problem?

Ihncheol
  -----Original Message-----
  From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]On
Behalf Of Keith Black
  Sent: Tuesday, January 07, 2003 9:56 PM
  To: discussion at nsrca.org
  Subject: Help: Webra TruTurn Adapter Bushing Problem


  I have a new Webra 1.45 Aero X and I'm trying to mount a 3 1/4" TruTurn
FAI spinner on it. The adapter kit that is listed for this engine on both
TruTurn's and Piedmont's web page is TT-0825-A which contains an 8mm
bushing.

  The bushing fits over the threaded part of the crankshaft, but will not
fit over the unthreaded base of the crankshaft.

  I tried another 8mm bushing that I have to make sure that the bushing with
the adapter kit wasn't incorrect and neither bushing will fit.

  Using a caliper the base of the crankshaft measures about 8.1 to 8.2 mm.

  Has anyone else had this problem? Any suggested solutions?

  Thanks,
  Keith Black

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030108/6bd21560/attachment.html