CA hinges installation - and CA talk

[John Gausby]

One thing i've noticed on the "foam safe CA" is that it seems to take alot longer to cure (no kicker) than the regular stuff. It is also a little more expensive as well.

I only use "foam safe" when gluing directly to foam. Have not had any problems using the regular thin CA on balsa covered foam wings with the trailing edge 1/4" thick or more. I also use a thin #11 blade to cut the slot guided by a Tetra hinge tool......John G.





Original message attached.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030227/c8337c14/MESSAGE.html