Transferring from drawing to wood

[Brian Young]

I used photocopy and spray adhesive (3m77), worked
fine. I think there are other ways which make the
photocopy ink transfer to the wood, wet it with a
solvent.


--- Anne & Xavier <xavier.mouraux at sympatico.ca> wrote:
> It's me again,
> 
> My next project for this winter  will be scratch
> build and involve transferring parts (bulkhead and
> ribs in particular) from the drawing to balsa and
> ply.
> What is the preferred method to do so ? I tried
> ironing a photocopy on the wood and also gluing the
> copy on the wood using contact cement but the
> results were not great. What are the other options
> (apart from getting a laser cut pack) or the proper
> procedure for the 2 above ?
> 
> Thanks a lot
> 
> Xavier
> 


=====
Brian Young
Tulsa
b4598070 at yahoo.com
918-745-6046h
918-838-0900w

__________________________________________________
Do you Yahoo!?
Yahoo! Shopping - Send Flowers for Valentine's Day
http://shopping.yahoo.com
=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#