FWIW Bad capacitors

Del Rykert drykert at rochester.rr.com
Tue Aug 26 17:27:24 AKDT 2003


You are correct Bob. I just choose to upgrade my motherboard which I felt was the best and easiest solution for me. My system was getting flaky and intermittent lockups. Then started hanging on bootup. Capacitors (6 of them) were just as you described.
 
     Del K. Rykert
     AMA - 8928 
     NSRCA - 473
     Kb2joi - General 


  ----- Original Message ----- 
  From: Bob Kane 
  To: nsrca 
  Sent: Tuesday, August 26, 2003 11:57 AM
  Subject: OT: FWIW Bad capacitors


  I discovered some bad capacitors on the motherboard of one my computers. I initially thought they were the result of a power supply that failed a few days after the recent power outage. However, a little research on the net has revealed that a lot of bad electrolytic capacitors were released to the OEM market. The bad ones in my computer were exactly the same brand and value (JPCON 2200uF 6.3V) highlighted in the articles. The primary victim seems to be computer motherboard OEMs, but there is no telling where else these dog capacitors have gone. 

  The bad capacitors will vent (internal pressure will bulge the metal case until either the reliefs stamped into the case let go or the rubber seal on the bottom blows out). The equipment may continue to function, but sometimes the electrolyte leaks out and damages the circuit board, or the capacitor shorts out. In my case, the computer still works, but I have some new caps on order from Digi-Key to replace them. All the bad ones have bulging tops and look like they have been marked with a black magic marker. The black spot is the leaking electrolyte.

  Further reading:

  http://www.spectrum.ieee.org/WEBONLY/resource/feb03/ncap.html

  http://www.pcstats.com/articleview.cfm?articleID=195

  http://www.overclockers.com/tips00140/


  Bob Kane
  getterflash at yahoo.com


------------------------------------------------------------------------------
  Do you Yahoo!?
  Yahoo! SiteBuilder - Free, easy-to-use web site design software
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030826/c984bd4c/attachment.html


More information about the NSRCA-discussion mailing list