Webra 1.60XP -Mixture

[Troy Newman]

the wider blade props tend to have better breaking on the down lines.

TN
----- Original Message ----- 
From: <randy10926 at comcast.net>
To: <discussion at nsrca.org>
Sent: Wednesday, August 13, 2003 2:10 PM
Subject: Re: Webra 1.60XP -Mixture


> I use the 17X12N with my 145.  Seems to work for me.  Why use a wide over
a
> narrow prop?
>
> Randy
> > From where are the MC carbs available?
> >
> > Thanks, Dave
> >
> > ----- Original Message ----- 
> > From: "Joe Lachowski" <jlachow at hotmail.com>
> > To: <discussion at nsrca.org>
> > Sent: Wednesday, August 13, 2003 11:16 AM
> > Subject: Re: Webra 1.60XP -Mixture
> >
> >
> > > Having flown the Webra 145 for 2 years in Masters(Focus and
Temptation),
> > it
> > > is no problem for Masters. For FAI the Focus(10 lbs - 5 ozs)
definitiely
> > > needs the Webra 160. A  10 lb Temptation(which I had), definitely
would
> > have
> > > been able to handle FAI on the 145. Having said that, my two new
> > Temptations
> > > will have 160s in them when they become available. Can never have
enough
> > > power. The nice thing about the 145 though is its fuel efficiency. I
can
> > > just about squeeze in two Masters sequences most of the time on 16 ozs
of
> > > Powermaster 15/16.
> > >
> > > Props of choice: 16.5X12W and 15.5X12.5W for Focus and 16.5X12W for
> > > Temptation.
> > >
> > > At the Nats, Jerry Budds, on the heavy side, EMC seemed to move around
the
>
> > > sky really well with the Webra 160 in it.
> > >
> > >
> > > >From: randy10926 at comcast.net
> > > >Reply-To: discussion at nsrca.org
> > > >To: discussion at nsrca.org
> > > >Subject: Re: Webra 1.60XP -Mixture
> > > >Date: Wed, 13 Aug 2003 14:08:23 +0000
> > > >
> > > >Man that sounds nice.  But as I can fly my AFocus with a 145AX
straight
> > up
> > > >out
> > > >of sight; it seems sufficient to me.
> > > >
> > > >Since I only fly intermediate and starting flying advanced, Does
Masters
> > or
> > > >FAI
> > > >need even more power than the 145AX can put out?
> > > >
> > > >Randy
> > > > >  Bob, if it comes with the MC that will be something else! I heard
2
> > > >reports
> > > > > about the release one was in 5 weeks the other from a reliable
source
> > > >said it
> > > > > will be in late November. I think that this engine is going to be
very
> > > >nice and
> > > > > I heard that it's no heavier then the 145AX. Mike
> > > > >
> > > > > Bob Pastorello <rcaerobob at cox.net> wrote:This is probably old news
to
> > > >many, but
> > > > > there's another horse in the stable, boys!
>
> > > > > Just received my Horizon catalog update, and right there, near the
> > > >middle,
> > > > > "Pattern Flying and Webra" from Tony Frackowiak and Jerry Budd.
> > > > >     And the topic is how to set up the new Webra 1.60 XP with
Mixture
> > > >carb.
> > > > > Great article and info.
> > > > >
> > > > > What really was a shock, is the NEXT page listing prices, and
clearly
> > > >shows
> > > > > WEBE1058XPM for $459.99...and that sure reads like it INCLUDES the
> > > >mixture carb.
> > > > >
> > > > > Anyone know if these are facts???  The stock number comes up empty
on
> > > >Horizon.
> > > > >
> > > > > Bob Pastorello, Oklahoma
> > > > > NSRCA 199, AMA 46373
> > > > > rcaerobob at cox.net
> > > > > www.rcaerobats.net
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > ---------------------------------
> > > > > Do you Yahoo!?
> > > >Yahoo! SiteBuilder - Free, easy-to-use web site design software
> > > >=====================================
> > > ># To be removed from this list, send a message to
> > > ># discussion-request at nsrca.org
>
> > > ># and put leave discussion on the first line of the body.
> > > >#
> > > >
> > >
> > > _________________________________________________________________
> > > Add photos to your messages with MSN 8. Get 2 months FREE*.
> > > http://join.msn.com/?page=features/featuredemail
> > >
> > > =====================================
> > > # To be removed from this list, send a message to
> > > # discussion-request at nsrca.org
> > > # and put leave discussion on the first line of the body.
> > > #
> > >
> >
> > =====================================
> > # To be removed from this list, send a message to
> > # discussion-request at nsrca.org
> > # and put leave discussion on the first line of the body.
> > #
> >
>
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
>
>
=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#