Mintor 1.70

[rcaerobob at cox.net]

HO-LY-COW !  That's a pretty beefy setup, for sure.  10% Nitro?  You're kiddin', right??

Bob P.
> 
> From: "Wayne Galligan" <wgalligan at goodsonacura.com>
> Date: 2003/08/11 Mon AM 11:27:50 EDT
> To: <discussion at nsrca.org>
> Subject: Mintor 1.70
> 
> Just a few notes on my initial test and break-in on this engine.  It has not been installed in my plane as of this writing but I cant wait.
> 
> 3M 1.70 stock header
> 10 % Magnum fuel
> Bluebird c.f. 2-stroke pipe  24.25" center of head to 1st baffle.  Total length of exhaust center of head to end of pipe  31.5"
> 
> Test day 98 degrees and about 35%+ humidity
> 
> 17x12N APC      high 8500rpm low 1600rpm
> 17x13 std APC   high 8250rpm  low 1500rpm 
> 
> This is after 5) 16oz tanks of breakin.  I broke it in just like the OS,  alternating rich to lean during first several tanks.
> 
> Wayne Galligan
> 
> 

Bob Pastorello, El Reno, OK, USA
rcaerobob at cox.net
www.rcaerobats.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030811/e741a765/reply.html