PPG questions

[Tony Stillman]

Sir:

Yes, I just can't type fast!!!

----- Original Message ----- 
From: "D Suding" <junk at velocitus.net>
To: <discussion at nsrca.org>
Sent: Monday, April 28, 2003 4:28 PM
Subject: Re: PPG questions


> In #2 you said "to medium mist coats". I assume you meant "two medium mist
> coats".  8 hours between these, or less?
>
> Thanks, Tony! I'll post a link to jpeg pix next weekend.  I'll let you
> critique.
>
> > Sir:
> >
> > Let's see if I can answer your questions...
> >
> > 1.The DU activator is designed for 8 hour "masking" time, meaning after
> > 8 hours, you can mask it.
> >
> > 2.  I usually spray to medium mist coats.
> >
> > 3.  I am able to sand primer in 3-4 hours.
> >
> > 4.  I answered this in #1.  ( 8 hours)
> >
> > I hope this helps and you have a GREAT finish!!
> >
> > ----- Original Message -----
> > From: "D Suding" <junk at velocitus.net>
> > To: <discussion at nsrca.org>
> > Sent: Monday, April 28, 2003 3:53 PM
> > Subject: PPG questions
> >
> >
> >> I'm going to be painting my Temptation with PPG from Radio South, and
> >> I have some questions:
> >>
> >> 1) How long should I wait between coats?
> >> 2) Will one coat per color be opaque?
> >> 3) How long after primer is shot before I can sand?
> >> 4) After shooting one color, how long before I can mask and shoot
> >> another?
> >>
> >> I am planning on shooting the primer, waiting a day, shooting white,
> >> waiting a day, ...
> >>
> >> Sound reasonable?
> >>
> >>
> >>
> >>
> >> =====================================
> >> # To be removed from this list, send a message to
> >> # discussion-request at nsrca.org
> >> # and put leave discussion on the first line of the body.
> >> #
> >>
> >>
> >>
> >
> >
> > =====================================
> > # To be removed from this list, send a message to
> > # discussion-request at nsrca.org
> > # and put leave discussion on the first line of the body.
> > #
>
>
>
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
>
>
>


=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#