FW: Re: Help with 402 Sequence

[fishgod at pobox.mtaonline.net]

So to make sure I have this right.  I come out of the split s, establish a
straigh line. Half roll to inverted, fly for at least 4 seconds with the
manuver centered then half roll to upright.  Establish straight line then
go into the stall turn on the end of the box.

Michael

Original Message:
-----------------
From: Gray E Fowler gfowler at raytheon.com
Date: Mon, 28 Apr 2003 13:36:21 -0500
To: discussion at nsrca.org
Subject: Re: Help with 402 Sequence


Michael

You are upright then roll upside down. Make a mental note on when you 
cross the center line because inverted left of center needs to be the same 
length as inverted right of center. There is a minimum time (3 seconds I 
think) that it has to be inverted but no max time. Rolling to inverted and 
staying straight  is the hard part.



Gray Fowler
Principal Chemical Engineer
Composites Engineering




"fishgod at pobox.mtaonline.net" <fishgod
Sent by: discussion-request at nsrca.org
04/28/2003 01:15 PM
Please respond to discussion

 
        To:     discussion at nsrca.org
        cc: 
        Subject:        Help with 402 Sequence


Hello all,
I need some help figuring this one out.

Manuver 10 : One outside Loop from the top (U)
Manuver 11 : Split 'S' (Turn around)
Manuver 12 : Straight Inverted Flight (D)

Manuver 12 is where it gets a little fuzzy.  Exiting the split 'S' I will
be upright.  Do I then do a half roll to inverted across the box to 
manuver
13 which is a stall turn with full roll up? 

Thanks for your help
Michael 

--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .


====================================# To be removed from this list, send a 
message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#





--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .


==================# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#