Ultimate 10-300

[Peter Bergstrom]

Earl,
 
Try an APC 16 X 8.  You'll get about the same rpm's, but much better
vertical and the braking on the downlines will be better.
 
Pete

-----Original Message-----
From: RcAddict [mailto:rc4fun at thebuzzards-nest.com]
Sent: Sunday, April 27, 2003 6:48 PM
To: discussion at nsrca.org
Subject: Re: Ultimate 10-300


Hi Earl
I use to run an Enya 120 GP with 15X10 APC on my Goldberg Ultimate had
plenty of vertical. Don't remember what it weighed. I'm running a 20X10 on
my Ohio also plenty of vertical it weighs 16 lbs..
John

----- Original Message ----- 
From: Earl  <mailto:ev3464 at sccoast.net> Vincent 
To: discussion at nsrca.org <mailto:discussion at nsrca.org>  
Sent: Wednesday, April 23, 2003 6:33 AM
Subject: Re: Ultimate 10-300

Hi John, I have a Goldberg Ultimate with a pumped Webra 120 w/pitts muffler,
any suggestions on a prop size, the model weight
is 9.2 Lbs. I flew it with an APC 14/12 and the engine was turning 8700,
flew ok but not much vertical, are you running anything in
this size, would appreciate any input.
Earl Vincent
Myrtle Beach, SC

----- Original Message ----- 
From: RcAddict <mailto:rc4fun at thebuzzards-nest.com>  
To: discussion at nsrca.org <mailto:discussion at nsrca.org>  
Sent: Monday, April 21, 2003 8:15 AM
Subject: Re: Ultimate 10-300

Hi Larry
I'm not a pattern flyer but I've had two Ultimates the 1/4 scale Goldberg
with a 120 and a 27% Ohio rc with a 50cc gasser . They both flew much the
same they like to tip stall at low throttle settings you have to keep the
speed up on landing and fly it to the ground. They are a hoot to fly though
they do the most intense snaps of any airplane I've ever flown. I would
suggest you get rid of as much weight as possible I know that's easier said
that done. Anyway good luck.
John L. 

----- Original Message ----- 
From: jed241 at msn.com <mailto:jed241 at msn.com>  
To: NSRCA <mailto:discussion at nsrca.org>  
Sent: Friday, April 18, 2003 12:45 PM
Subject: Ultimate 10-300

This isn't a pattern topic, but I'm certain that many will share opinions,
good / bad...<VBG>
 
Any thoughts on a Quadrotech 1/4 Scale Ultimate 10-300? I'm getting one at a
good price...
 
Web-Site:   http://www.arcdirect.com/quadrotech/ultimate.htm
<http://www.arcdirect.com/quadrotech/ultimate.htm> 
 
Any inherent problems with the kit, any mods to make it better / lighter?
 
I'm looking at a YS 1.40DZ w/ 3-bladed prop, is this enough power if it come
out at 11.5lbs and who makes a Pitts muffler for it? What size prop would be
used for a 3-bladed set up?
 
The stab is 1/4" balsa slab and/or stick I think, would it be beneficial to
have foam cut for an airfoil stab and rudder?
 
I appreciate your thoughts, even if it's to sell it real fast...lol
 
Larry
NSRCA 3083
AMA 5024


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030428/172ab6e3/attachment.html