Props...

[Jon Uhler]

Thanks Tom.

I plan on starting with a 17x10 APC.

This will be my first pumped engine.  Is there a need to wrap the tank with
strapping tape like some of the YS guys do?

Thanks.

Jon

-----Original Message-----
From: Tom Collins [mailto:tomc at buyrc.com]
Sent: Tuesday, April 15, 2003 8:08 PM
To: discussion at nsrca.org
Subject: RE: Props...


I'm running an APC 17x12 on my 3M140 Vertex. I've also been running a
Mejzlic 18x10. Both props are my favorites.  I believe Jim Woodward said he
is running an APC 16 1/2 x 10 on his 3M170 Alliance.

Both of our 3M engines ran great at the Riverside, CA pattern contest this
past weekend.

For your info, I have both the 3M140 and 3M170 engines in stock for
immediate shipment.

Tom Collins
www.BuyRC.com

-----Original Message-----
From: discussion-request at nsrca.org
[mailto:discussion-request at nsrca.org]On Behalf Of Jon Uhler
Sent: Tuesday, April 15, 2003 1:56 PM
To: 'discussion at nsrca.org'
Subject: Props...

Sorry to bring up an old topic, if this has been covered before, but what
props are you guys spinning on the 3M 1.40?

Thanks.

Jon



=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#

This transmission is intended only for the use of the addressee and may
contain information that is privileged, confidential, and exempt from
disclosure under applicable law. If you are not the intended recipient, or
the employee or agent responsible for delivering the message to the intended
recipient, this serves as notice to you that any dissemination,
distribution, or copying of this communication is strictly prohibited. If
you have received this communication in error please notify us immediately
via e-mail at the sender's e-mail address, delete this message from your
computer and/or computer network and destroy any hard copies that may have
been made. Thank you.
=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#