Tubing Beader

[Verne Koester]

Dave,
Mine worked fine but I've only used it once. As you tighten the unit, things
get pretty tight and don't wobble. Also, the internal curve you're creating
kind of locks things in.

Verne


----- Original Message -----
From: "David Harmon" <k6xyz at attbi.com>
To: <discussion at nsrca.org>
Sent: Saturday, September 28, 2002 10:43 PM
Subject: Tubing Beader


> Verne...how well does that beader work that you got from Earls?
> I need to bead a 5/8 od alum tube but I am concerned about the tool
> wobbling because it does not seem to fit very well inside the tube.
> The WANCO tool is a heckova lot better and supports the od of the tube
> but is a lot more expensive.  http://wancotool.com/tube.htm
> What was your experience with the Earls unit?
> Regards
> Dave
>
>
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
>
>

=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#