Finding the SLOT

[Del Rykert]

Braze or solder (high temp) socket head to needle valve head and adjust with
driver that won't vibrate off.

     Del K. Rykert
     AMA - 8928
     NSRCA - 473
     Kb2joi - General
----- Original Message -----
From: "John Crozier" <sjcrozier at comcast.net>
To: "nsrca discussion" <discussion at nsrca.org>
Sent: Sunday, September 22, 2002 11:04 AM
Subject: Finding the SLOT


> I'm the proud owner of a Webra 145X.
> Ran great right out of the box.
> I'm having trouble locating the slot with a screwdriver on the  HS needle
> with the engine running(Hyde ARI mount).
> I been having limited success using a short piece of heat shrink tubing
> shrunk over the needle.
> Any better ideas?....croz
>
>
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
>


=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#