YS-140L on Mezlik 16-12? Cool Power 30% Heli

[David Harmon]

Yes...your comments confirms my experience with Klotz HeliGlow oil.
I mix my own stuff 24x30 and it just works great!
Dave
-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
On Behalf Of Troy Newman
Sent: Thursday, September 19, 2002 3:22 PM
To: discussion at nsrca.org
Subject: Re:YS-140L on Mezlik 16-12? Cool Power 30% Heli


Yes...the oil is much thinner and leaves a very light mist...I think
this may be becasue the oil is burning off more too. The thinner oil
when it hits that hot header pipe acts like a smoke system and
burns.....I have run this fuel for over a year now and in inspecting my
motors......I'm talking  18 cases of fuel wear seems to be normal
compared with my prvious fuel. Another bonus is up here in Colorado it
gets cold in the winter and the oils get thicker and "gel" up in the
pumps regulators and the injectors of the OS....Since I have been
running this Heli fuel even in 30 deg weather in January last year it
was great....no "gum up"....
 
ALso the carbon inside the motor is really down if not gone....I really
like the fuel. It is probably the best stuff I have found. I have seen
more peoples problems go away when I fill up their tank with this stuff.

 
I ran a local and very popular fuel pattern for a long time and really
liked its performance. This stuff is better!
 
Troy
 
 
----- Original Message ----- 
From: David Harmon <mailto:k6xyz at attbi.com>  
To: discussion at nsrca.org 
Sent: Thursday, September 19, 2002 4:12 PM
Subject: RE: RPM turned by YS-140L on Mezlik 16-12?

Troy...have you noticed a lot less oil mess on the fuselage since you
changed to CP 30 Heli?
Dave

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20020919/7be131c9/attachment.html