Coupler clamps

[Henderson,Eric]

Verne,
       they look like the .61 clips but I think that they are bigger. I am
using them on my OS 1.60 Hatori Header and ES pipe with the cream colored
coupler. Here are the actual sizes - _I just measured them) Relaxed id = 1",
max id = 1.25". They are the same ones that came with my OS 1.40 pipe and
header etc. Does this meet your need?

Regards,

Eric.

-----Original Message-----
From: Verne Koester [mailto:verne at twmi.rr.com]
Sent: Monday, September 09, 2002 4:16 PM
To: discussion at nsrca.org
Subject: Re: Coupler clamps


Hi Eric,
Thanks, are these the same ones that come in a .60-size Hatori pipe? I have
some of those and they are just a skosh too small.

Verne
----- Original Message -----
From: "Henderson,Eric" <eric.henderson at gartner.com>
To: <discussion at nsrca.org>
Sent: Monday, September 09, 2002 6:26 AM
Subject: RE: Coupler clamps


> There is a packet of just the clamps  part number HAT114.
>
> You can get them at the Hellicoptem rplace in Philly. They sell large
scale
> planes as well - Looking for their URL as I type. They are at the WRAM
show
> every year - on the main stage.
>
> Eric.
>
> http://www.hhiheli.com/
>
> Call them - The web-site is not easy to use. They are in Coopersburg PA.
>
> E.
>
> -----Original Message-----
> From: Verne Koester [mailto:verne at twmi.rr.com]
> Sent: Sunday, September 08, 2002 9:31 PM
> To: discussion at nsrca.org
> Subject: Re: Coupler clamps
>
>
> Thanks Tom. I'm sure the size I need is available. Just a matter of
finding
> them!
>
> Verne
>
>
> ----- Original Message -----
> From: "Koenig, Tom" <Tom.Koenig at actewagl.com.au>
> To: <discussion at nsrca.org>
> Sent: Sunday, September 08, 2002 7:18 PM
> Subject: RE: Coupler clamps
>
>
> > Verne,
> > Just a suggestion. I actually had the same problem at one stage. I found
> > some in a genuine O.S silicone coupler packet. Had to buy the the whole
> lot
> > even though I was only after the clamps, which I guess is fair
> >
> > Strange thing is...I've never seen them since, rare as hens teeth down
> > here!! Maybe not so around your part of the planet.
> >
> > Tom
> >
> > > ----------
> > > From: Verne Koester[SMTP:verne at twmi.rr.com]
> > > Reply To: discussion at nsrca.org
> > > Sent: Monday, 9 September 2002 5:41
> > > To: pattern at rcmailinglists.com; NSRCA
> > > Subject: Coupler clamps
> > >
> > > Anybody know where I can get the spring style coupler clamps that will
> fit
> > > over a coupler with a 1.235 o.d.? The clamps I'm referring too are the
> > > type that comes with a hatori muffler. The tubing to fit over is 7/8"
> > > i.d., 1.235 o.d..
> > >
> > > Thanks,
> > > Verne
> > >
> > >
> > >
> >
> >
> > ************************************************************************
> > *PLEASE NOTE*  This email and any attachments may
> > be confidential. If received in error, please delete all
> > copies and advise the sender. The reproduction or
> > dissemination of this email or its attachments is
> > prohibited without the consent of the sender.
> >
> > WARNING RE VIRUSES:  Our computer systems sweep
> > outgoing email to guard against viruses, but no warranty
> > is given that this email or its attachments are virus free.
> > Before opening or using attachments, please check for
> > viruses.  Our liability is limited to the re-supply of any
> > affected attachments.
> >
> > Any views expressed in this message are those of the
> > individual sender, except where the sender expressly,
> > and with authority, states them to be the views of the
> > organisation.
> > ************************************************************************
> >
> >
> > =====================================
> > # To be removed from this list, send a message to
> > # discussion-request at nsrca.org
> > # and put leave discussion on the first line of the body.
> > #
> >
> >
>
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
>
>

=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#
=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#