High temp epoxy

[Rcmaster199 at aol.com]

In a message dated 9/6/2002 9:58:52 AM Eastern Daylight Time, 
tony at radiosouthrc.com writes:


> .  Heres how to get some free........everyone remember this-trust me it 
> works. 
> 
> First make up a fake company name ( or if you can use your real company 
> name).  Log onto www.dexteraero.com get the contact info closest to where 
> you live.  Call and say that you are investigating high temp epoxy 
> adhesives and are bonding and conducting Lap shear tests at 300 and 350F. 
> Your analysis says you need about 1000 PSI of shear strength at 330F-ask 
> for Hysol 9394. You are bonding 3 different times and only need about 100 
> grams for each time. They will send you 3 pre-weighed mixing semco 
> cartridges. If they start asking you questions that you cannot answer 
> prentend to be new on the job and where told to do this, or better a supply 
> chain management person-they buy everything without knowing 
> anything......Hysol will send these as free samples. If you are worried 
> than you can by these cartridges from from the local distributor for about 
> $35 each or get a quart for about $75. 
> 
> Now if there is a Hysol rep on this list then NEVER MIND.......It all for 
> the promotion of pattern.......
> 
> 
> 
> Gray Fowler
> Principal Chemical Engineer
> Composites Engineering 
> 

WHY GRAY FOWLER, I DECLARE!!!!!!!!!!!!! That is terrible. To cheat fellow 
Chemists; what is this world coming to???!!!! (TIC) 

Lance, you sure you want to partner with this guy? Oh, I forgot: too late. 
(bg)

Matt K
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20020906/1acb3fe0/attachment.html