C/F wing tubes

[Maureen Dunphy]

Precision Aero Composites also sells PBG CF wing tubes and CF stab tubes.

Mike & Maureen Dunphy
Precision Aero Composites
662-462-5480-phone
662-462-5465-fax
http://www.precisionaerocomposite.com
  ----- Original Message ----- 
  From: PROESCO-ARQ. FRANCISCO GONZALEZ 
  To: discussion at nsrca.org 
  Sent: Sunday, November 17, 2002 11:38 PM
  Subject: RE: C/F wing tubes


  hi Terry!
  where i can contact to Lamar?? i'm interested in the wing tubes
  thanks
  francisco
    -----Mensaje original-----
    De: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]En nombre de Terry Brox
    Enviado el: Domingo, 17 de Noviembre de 2002 10:34 p.m.
    Para: discussion at nsrca.org
    Asunto: Re: C/F wing tubes


    Dan,
          I am using one of Lamar's C/F wing tubes and just cut a piece of PVC pipe, cut a small piece out, collapsed it into the tube and "Zapped" it in place. I then drilled and tapped for 6 32. I have quite a bit of time on this set up and no sign of stress yet. I also, and always have, tapped the hard point in the wing so there is a lot of "threads" all the way through. 
          Also, Lamar sells a really neat nylon insert that fits his tubes perfectly. 
                                Happy building,  Terry
      ----- Original Message ----- 
      From: Dan Curtis 
      To: discussion at nsrca.org 
      Sent: Sunday, November 17, 2002 4:39 PM
      Subject: C/F wing tubes


      When using a carbon fiber wing tube can a person use the screw hold down in the wing method or are we limited to using wing holds in the fuselage?  In other words can a small block of wood be placed in each end of the tube and then the tube and wood block be drilled for a 4/40 screw (self tapping) or is the carbon fiber to prone to crack at the drilled hole??

      Thanks
      Dan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20021118/09927f32/attachment.html