C/F wing tubes

[s.vannostrand at kodak.com]

No problem, Dan.  You will need some dowel or ply inside the tube to hold a
tee nut (as I do) or nyrod as Troy suggests.  The hole size inthe CF is
unimportant.  All the load is on the insert.  Just insure your insert is
large enough to distribute the load.  CF doesn't handle point loads well.
I used a 3/4" long piece of 1/4" ply that was sanded to an arc on one side
and center drilled for a tee nut on my Aries.  All assembly was with the
IC2000 black CA.  200 flights, no problems at all.

--Lance



=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#