Focus Wing Tube

[RC Steve Sterling]

Thanks to those that helped. With a little 150 grit stuck on pvc pipe, it
now slides in smooth as can be.

Steve

-----Original Message-----
From: discussion-request at nsrca.org
[mailto:discussion-request at nsrca.org]On Behalf Of John Crozier
Sent: Monday, November 11, 2002 5:22 AM
To: discussion at nsrca.org
Subject: Re: Focus Wing Tube


Steve..I had to make a "tool" by wrapping 150 grit sandpaper around the last
2" of a long wood dowel. Then gently reaming the goopy epoxy to achieve the
fit....croz

----- Original Message -----
From: "RC Steve Sterling" <rcsteve at tcrcm.org>
To: "Discussion at Nsrca. Org" <discussion at nsrca.org>
Sent: Monday, November 11, 2002 1:23 AM
Subject: Focus Wing Tube


> Anybody got any ideas on how to get the wing tube spar into the wing on a
> focus. If I force it any more, it will break something. About 9 inches is
> all I can achieve.
>
> Steve
>


=====================================
# To be removed from this list, send a message to
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#



=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#