Alliance Info

[Jean-Paul Delteil]

----- Original Message -----
From: "Koenig, Tom" <Tom.Koenig at actewagl.com.au>
To: <discussion at nsrca.org>
Sent: Monday, November 11, 2002 10:03 PM
Subject: RE: Alliance Info


> Reeves,
>
> Check your wing shucks to see if the Dihedral was actually cut into the
> cores as such. I was told that this was standard ZN practice, which is why
> there is no measurements given.
> On my Synergy , I just joined the halves in the shucks as it was all
> pre-determined. I'm not sure how the Alliance was cut, but just something
to
> watch out for.
> As far as everything else is concerned, I think the other gentlemen
covered
> it sufficiently.
>
> Good luck.
>
> Tom
>
> > ----------
> > From: Reeves[SMTP:reeves at mtaonline.net]
> > Reply To: discussion at nsrca.org
> > Sent: Saturday, 9 November 2002 21:38
> > To: discussion at nsrca.org
> > Subject: Alliance Info
> >
> > Hi, I am building an Alliance but I don't have a set of plans or
> > instructions. Can someone who has built one please give me the amount of
> > dihedral under each wing panel at center or wherever they show it and
the
> > CG location at the root. Also if you have a set of instructions that you
> > would be willing to copy please let me know. I also need the incidence
> > angles for wing and stab if it shows them. Thanks for your help. Reeves
> > Lippincott in Alaska.
> >
>

=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#