Focus Wing Tube

[Lee Davis]

We err on the side of caution (tight).  If it's too tight sand inside the socket where the tube passes the support rib with some sandpaper wrapped around a dowel.  Do *not* cut the tube short - it's possible the wing could fail without the rib supporting the tube.

Lee Davis
Piedmont Models
http://www.piedmontmodels.com/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20021111/de28897b/attachment.html