Focus Wing Tube

[Tom Mitchell]

  ----- Original Message ----- 
  From: RC Steve Sterling 
  To: Discussion at Nsrca. Org 
  Sent: Monday, November 11, 2002 2:23 AM
  Subject: Focus Wing Tube


  Anybody got any ideas on how to get the wing tube spar into the wing on a focus. If I force it any more, it will break something. About 9 inches is all I can achieve.

  Steve

  Steve -
  I ran into the same problem on both of the ARC versions I am putting together.  Use the RC Model Enterprises carbon fiber tube.  It is machined, and has a more accurate (i.e. slightly smaller, and more uniform) o.d.  Cut the socket out of the fuse, and replace it with the a carbon fiiber socket while you are at it.

  Tom M.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20021111/c884d292/attachment.html