CF pipe mounting?

[Tony Stillman]

Terry:

I use a "lord mount" on it.  I attach a strap around the back of the pipe, just forward of the stinger.  The strap attaches to the lord mount via a 8-32 bolt.

I use the same set-up on the front of the pipe, where the teflon attaches to the pipe.  A strap, then a piece of brass tubing to make a bushing to get the proper height, then a long screw to go through the strap, bushing, and into the lord mount.

Never had any breakage using a Hyde mount.

Tony Stillman
Radio South, Inc.
3702 N. Pace Blvd.
Pensacola, Fl 32505
www.radiosouthrc.com
800-962-7802
  ----- Original Message ----- 
  From: Terry Brox 
  To: discussion at nsrca.org 
  Sent: Saturday, November 02, 2002 9:40 PM
  Subject: CF pipe mounting?


  I would like some ideas from those using the Carbon Fiber tune pipes (4 stroke), how to mount. I have heard they can be fragile, so I need some ideas. Thanks in advance, Terry

  PS I will be using at least 7" of teflon between pipe and header (9" overall coupler length).
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20021104/9956486d/attachment.html