History of the Ultimate Aircraft Corporation

[Bill Glaze]

Buddy:
If Logan Utah is listed, I suggest you try contacting Dick Hanson; he's
from there, and has a finger on the pulse of everything around there.
Maybe he can steer you right.
Bill Glaze

BUDDYonRC at aol.com wrote:

> Marty
> I have been a fan of the ultimate for some time and presently have two
> kits one Ohio R/C
> and the other is a Fiberglass fuse kit which was produced by a company
> called Daedalus Research, Inc. in 1990 I am the fourth owner of this
> kit and am looking for information.
>
> The glass work is beautiful with all panel lines and rivets cast in
> the mold it is a 25% scale model with sheeted wings and tail feathers
> I would like to build it as much to scale as possible. The Mfg.,
> states in their instructions that a clear canopy is available and is
> included with the kit but it is not. the canopy in molded in the fuse
> and has to be cut out for installation of the clear canopy. The Mfg.
> list's one address in Arlington, VA and another in Logan, UT and after
> reading your post thought you might be able to shed some light on the
> subject, any help will be greatly appreciated.
> Buddy Brammer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20021212/02d3adb2/attachment.html