[NSRCA-dist8] Issues (Who Me?)

[J N Hiller]

Yah maybe the 120 was about the limit for reliable use of CA hinges. You
know me! I don't like problems!


-----Original Message-----
From: nsrca-dist8-bounces at lists.nsrca.org
[mailto:nsrca-dist8-bounces at lists.nsrca.org]On Behalf Of Rex
Sent: Monday, June 27, 2011 10:58 AM
To: AK, ID, MT, OR, WA, WY
Subject: Re: [NSRCA-dist8] Issues (Who Me?)

Any hinge can break....and it's a pain fixing it!  I've always preferred
pinned flat hinges....I tried the round, post type but broke quite a few of
them.

J N Hiller <jnhiller at earthlink.net> wrote:

>Yes I have airplane issues also, occasionally.
>I've got a little aileron movement beyond gear train clearance.
>Someone at the Redmond contest, I don't remember who, asked what hinges I
>use. I use 5 CA hinges in ailerons and 3 in each elevator and 4 pin hinges
>in the rudder, due to the high degree of movement.
>I now have a broken inboard aileron hinge and this is on a relatively
smooth
>running 2 stroke (Option-160). I guess I need to double up on them on the
>inboard end, go back to pin hinges or figure out how to balance the flying
>surfaces.
>Conclusion:
>I may contribute to my own problem fitting them with no gap forcing the
>hinge plastic to flex in near "0" length. It may be beneficial to cut a
>little relief where the hinges enter the center of the aileron leading edge
>'V' to allow some length for a 'bending radius'. I use to do this removing
>the MonoKote before gluing but it looked hokey. Now I cut the overlapping
>MonoKote away before ironing it down. In the future I will sand a .010 to
>.015 flat from the front of the 'V' where the hinge slots are, maintaining
a
>neat sanitary uniform appearance. (It's a Hiller thing)
>Yes there probably is a source / quality issue but I don't know who's
hinges
>are better.
>E-Power is looking better all the time:
>Jim
>
>
>_______________________________________________
>NSRCA-dist8 mailing list
>NSRCA-dist8 at lists.nsrca.org
>http://lists.nsrca.org/mailman/listinfo/nsrca-dist8
>
_______________________________________________
NSRCA-dist8 mailing list
NSRCA-dist8 at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-dist8